Tuesday, June 26, 2012

Eyemycin


Generic Name: erythromycin ophthalmic (e RITH row MYE sin off THAL mik)

Brand Names: Eyemycin, Roymicin


What is Eyemycin (erythromycin ophthalmic)?

Erythromycin ophthalmic is an antibiotic.


Erythromycin ophthalmic (for the eyes) is used to treat bacterial infections of the eyes.

Erythromycin ophthalmic may also be used for purposes other than those listed in this medication guide.


What is the most important information I should know about Eyemycin (erythromycin ophthalmic)?


You should not use erythromycin ophthalmic if you are allergic to it, or if you have a viral or fungal infection in your eye. This medication is used to only treat infections caused by bacteria. Do not allow the tip of the tube to touch any surface, including your eyes or hands. If the tip becomes contaminated it could cause an infection in your eye, which can lead to vision loss or serious damage to the eye.

Use this medication for the full prescribed length of time. Your symptoms may improve before the infection is completely cleared. Erythromycin ophthalmic will not treat a viral infection such as the common cold or flu.


Erythromycin ophthalmic may cause blurred vision. Be careful if you drive or do anything that requires you to be able to see clearly.


Do not use other eye medications during treatment with erythromycin ophthalmic unless your doctor tells you to.


What should I discuss with my healthcare provider before using Eyemycin (erythromycin ophthalmic)?


You should not use erythromycin ophthalmic if you are allergic to it, or if you have a viral or fungal infection in your eye. This medication is used to only treat infections caused by bacteria. FDA pregnancy category B. Erythromycin ophthalmic is not expected to harm an unborn baby. Tell your doctor if you are pregnant or plan to become pregnant during treatment. It is not known whether erythromycin ophthalmic passes into breast milk or if it could harm a nursing baby. Do not use this medication without telling your doctor if you are breast-feeding a baby.

How should I use Eyemycin (erythromycin ophthalmic)?


Use exactly as prescribed by your doctor. Do not use in larger or smaller amounts or for longer than recommended. Follow the directions on your prescription label.


Wash your hands before using the eye ointment.

To apply the ointment:



  • Tilt your head back slightly and pull down your lower eyelid to create a small pocket. Hold the ointment tube with the tip pointing toward this pocket. Look up and away from the tip.




  • Squeeze out a ribbon of ointment 1/2-inch long into the lower eyelid pocket without touching the tip of the tube to your eye. Look down and close your eyes for a few minutes. Rolling your eyes around gently will help spread the ointment evenly.




  • After opening your eyes, you may have blurred vision for a short time. Avoid driving or doing anything that requires you to be able to see clearly.




Do not allow the tip of the tube to touch any surface, including your eyes or hands. If the tip becomes contaminated it could cause an infection in your eye, which can lead to vision loss or serious damage to the eye.

Use this medication for the full prescribed length of time. Your symptoms may improve before the infection is completely cleared. Erythromycin ophthalmic will not treat a viral infection such as the common cold or flu.


Store at room temperature away from moisture and heat. Keep the tube tightly closed when not in use.

What happens if I miss a dose?


Use the missed dose as soon as you remember. Skip the missed dose if it is almost time for your next scheduled dose. Do not use extra medicine to make up the missed dose.


What happens if I overdose?


Seek emergency medical attention or call the Poison Help line at 1-800-222-1222.

What should I avoid while using Eyemycin (erythromycin ophthalmic)?


Erythromycin ophthalmic may cause blurred vision. Be careful if you drive or do anything that requires you to be able to see clearly.


Do not use this medication while wearing contact lenses. Wait at least 15 minutes after using erythromycin ophthalmic before putting your contact lenses in.

Do not use other eye medications during treatment with erythromycin ophthalmic unless your doctor tells you to.


Eyemycin (erythromycin ophthalmic) side effects


Get emergency medical help if you have any of these signs of an allergic reaction: hives; difficult breathing; swelling of your face, lips, tongue, or throat. Stop using erythromycin ophthalmic and call your doctor at once if you have severe burning, stinging, or other irritation after using the ointment.

Less serious side effects may include:



  • mild stinging or eye irritation;




  • mild itching or redness




  • blurred vision; or




  • increased sensitivity to light.



This is not a complete list of side effects and others may occur. Call your doctor for medical advice about side effects. You may report side effects to FDA at 1-800-FDA-1088.


What other drugs will affect Eyemycin (erythromycin ophthalmic)?


It is not likely that other drugs you take orally or inject will have an effect on erythromycin ophthalmic used in the eyes. But many drugs can interact with each other. Tell your doctor about all medications you use. This includes prescription, over-the-counter, vitamin, and herbal products. Do not start a new medication without telling your doctor.



More Eyemycin resources


  • Eyemycin Use in Pregnancy & Breastfeeding
  • Eyemycin Support Group
  • 0 Reviews for Eyemycin - Add your own review/rating


  • Ilotycin Advanced Consumer (Micromedex) - Includes Dosage Information

  • ilotycin Prescribing Information (FDA)



Compare Eyemycin with other medications


  • Conjunctivitis, Bacterial


Where can I get more information?


  • Your pharmacist can provide more information about erythromycin ophthalmic.


Sunday, June 24, 2012

Nasalcrom nasal


Generic Name: cromolyn sodium (nasal) (KRO mo lin SO dee um)

Brand Names: Nasalcrom


What is Nasalcrom (cromolyn sodium (nasal))?

Cromolyn sodium is an anti-inflammatory medication. It works by preventing the release of substances in the body that cause inflammation.


Cromolyn sodium nasal is used to prevent allergy symptoms such as runny nose, stuffy nose, sneezing, itching, and post-nasal drip.


Cromolyn sodium nasal will not treat allergy symptoms that have already begun. The medication works best if used at least 1 week before you come into contact with things you are allergic to (pollen, dust, pets, etc).


Cromolyn sodium nasal will not treat the symptoms of asthma, sinus infections, or the common cold.


Cromolyn sodium nasal may also be used for purposes not listed in this medication guide.


What is the most important information I should know about Nasalcrom (cromolyn sodium (nasal))?


You should not use this medication if you are allergic to cromolyn sodium.

Before you use cromolyn sodium nasal, tell your doctor if you have asthma, drug allergies, or polyps in your nose.


Cromolyn sodium nasal will not treat allergy symptoms that have already begun. The medication works best if used at least 1 week before you come into contact with things you are allergic to (pollen, dust, pets, etc).


Stop using this medication and call your doctor if you have severe burning, stinging, or irritation in your nose, nosebleeds, sinus pain, sores in your nose, wheezing, chest tightness, fever, or green/yellow mucus from your nose.


Do not use cromolyn sodium nasal more than 6 times in a 24-hour period. Do not use this medication for longer than 12 weeks unless your doctor has told you to.

What should I discuss with my healthcare provider before using Nasalcrom (cromolyn sodium (nasal))?


You should not use this medication if you are allergic to cromolyn sodium.

To make sure you can safely use cromolyn sodium nasal, tell your doctor if you have any of these other conditions:



  • asthma;




  • drug allergies; or




  • polyps in your nose.




FDA pregnancy category B. This medication is not expected to be harmful to an unborn baby. Tell your doctor if you are pregnant or plan to become pregnant during treatment. It is not known whether cromolyn sodium passes into breast milk or if it could harm a nursing baby. Do not use this medication without telling your doctor if you are breast-feeding a baby.

How should I use Nasalcrom (cromolyn sodium (nasal))?


Use exactly as prescribed by your doctor. Do not use in larger or smaller amounts or for longer than recommended. Follow the directions on your prescription label.


This medicine is usually given as 1 spray into each nostril every 4 to 6 hours during allergy season or within 1 week before you will be exposed to an allergen. Follow your doctor's instructions.


Do not use cromolyn sodium nasal more than 6 times in a 24-hour period. Do not use this medication for longer than 12 weeks unless your doctor has told you to.

To use the nasal spray:



  • Blow your nose gently before each use.




  • Keeping your head upright, insert just the tip of the spray bottle into your nostril. Hold your other nostril closed with one finger. Spray the medicine into the nostril while inhaling, then sniff deeply a few times to make sure the medicine gets up into your nasal passages.




  • Repeat these steps in your other nostril.




  • After using the nasal spray, rinse the tip with hot water or wipe it with a clean tissue and recap. Avoid getting water into the nasal spray tip.



It may take up to 2 weeks before your symptoms improve. Keep using the medication as directed and tell your doctor if your symptoms do not improve after 2 weeks of treatment.


Store at room temperature away from moisture, heat, and light. Keep the bottle capped when not in use.

What happens if I miss a dose?


Use the missed dose as soon as you remember. Skip the missed dose if it is almost time for your next scheduled dose. Do not use extra medicine to make up the missed dose.


What happens if I overdose?


Seek emergency medical attention or call the Poison Help line at 1-800-222-1222.

What should I avoid while using Nasalcrom (cromolyn sodium (nasal))?


Avoid getting this medication in your eyes. If this does happen, rinse with water.

Nasalcrom (cromolyn sodium (nasal)) side effects


Get emergency medical help if you have any of these signs of an allergic reaction: hives or itching; difficulty breathing; severe dizziness; swelling of your face, lips, tongue, or throat. Stop using this medication and call your doctor if you have any of these serious side effects:

  • severe burning, stinging, or irritation in your nose;




  • nosebleeds, sinus pain, or sores in your nose;




  • wheezing, tight feeling in your chest; or




  • fever, green or yellow mucus from the nose.




Less serious side effects may include mild burning or stinging inside your nose after use.

This is not a complete list of side effects and others may occur. Call your doctor for medical advice about side effects. You may report side effects to FDA at 1-800-FDA-1088.


What other drugs will affect Nasalcrom (cromolyn sodium (nasal))?


There may be other drugs that can interact with cromolyn sodium nasal. Tell your doctor about all medications you use. This includes prescription, over-the-counter, vitamin, and herbal products. Do not start a new medication without telling your doctor.



More Nasalcrom resources


  • Nasalcrom Side Effects (in more detail)
  • Nasalcrom Use in Pregnancy & Breastfeeding
  • Nasalcrom Support Group
  • 0 Reviews for Nasalcrom - Add your own review/rating


Compare Nasalcrom with other medications


  • Hay Fever


Where can I get more information?


  • Your pharmacist can provide more information about cromolyn sodium nasal.

See also: Nasalcrom side effects (in more detail)


Thursday, June 21, 2012

Angiomax



bivalirudin

Dosage Form: injection, powder, lyophilized, for solution
FULL PRESCRIBING INFORMATION

 INDICATIONS AND USAGE



  Percutaneous Transluminal Coronary Angioplasty (PTCA)


Angiomax® (bivalirudin) is indicated for use as an anticoagulant in patients with unstable angina undergoing percutaneous transluminal coronary angioplasty (PTCA).



  Percutaneous Coronary Intervention (PCI)


Angiomax with provisional use of glycoprotein IIb/IIIa inhibitor (GPI) as listed in the REPLACE-2 trial [see Clinical Studies (14.1)] is indicated for use as an anticoagulant in patients undergoing percutaneous coronary intervention (PCI).


Angiomax is indicated for patients with, or at risk of, heparin induced thrombocytopenia (HIT) or heparin induced thrombocytopenia and thrombosis syndrome (HITTS) undergoing PCI.



  Use with Aspirin


Angiomax in these indications is intended for use with aspirin and has been studied only in patients receiving concomitant aspirin [see Dosage and Administration (2.1) and Clinical Studies (14.1)].



  Limitation of Use


The safety and effectiveness of Angiomax have not been established in patients with acute coronary syndromes who are not undergoing PTCA or PCI.



 DOSAGE AND ADMINISTRATION



  Recommended Dose


Angiomax is for intravenous administration only.


Angiomax is intended for use with aspirin (300-325 mg daily) and has been studied only in patients receiving concomitant aspirin.




For patients who do not have HIT/HITTS


The recommended dose of Angiomax is an intravenous (IV) bolus dose of 0.75 mg/kg, followed by an infusion of 1.75 mg/kg/h for the duration of the PCI/PTCA procedure. Five min after the bolus dose has been administered, an activated clotting time (ACT) should be performed and an additional bolus of 0.3 mg/kg should be given if needed.


GPI administration should be considered in the event that any of the conditions listed in the REPLACE-2 clinical trial description [see Clinical Studies (14.1)] is present.




For patients who have HIT/HITTS


The recommended dose of Angiomax in patients with HIT/HITTS undergoing PCI is an IV bolus of 0.75 mg/kg. This should be followed by a continuous infusion at a rate of 1.75 mg/kg/h for the duration of the procedure.




For ongoing treatment post procedure


Continuation of the Angiomax infusion following PCI/PTCA for up to 4 hours post-procedure is optional, at the discretion of the treating physician. After four hours, an additional IV infusion of Angiomax may be initiated at a rate of 0.2 mg/kg/h (low-rate infusion), for up to 20 hours, if needed.



  Dosing in Renal Impairment


No reduction in the bolus dose is needed for any degree of renal impairment. The infusion dose of Angiomax may need to be reduced, and anticoagulant status monitored in patients with renal impairment. Patients with moderate renal impairment (30-59 mL/min) should receive an infusion of 1.75 mg/kg/h. If the creatinine clearance is less than 30 mL/min, reduction of the infusion rate to 1 mg/kg/h should be considered. If a patient is on hemodialysis, the infusion rate should be reduced to 0.25 mg/kg/h [see Use In Specific Population (8.6)].



  Instructions for Administration


Angiomax is intended for intravenous bolus injection and continuous infusion after reconstitution and dilution. To each 250 mg vial, add 5 mL of Sterile Water for Injection, USP. Gently swirl until all material is dissolved. Each reconstituted vial should be further diluted in 50 mL of 5% Dextrose in Water or 0.9% Sodium Chloride for Injection to yield a final concentration of 5 mg/mL (e.g., 1 vial in 50 mL; 2 vials in 100 mL; 5 vials in 250 mL). The dose to be administered is adjusted according to the patient's weight (See Table 1).


If the low-rate infusion is used after the initial infusion, a lower concentration bag should be prepared. In order to prepare this bag, reconstitute the 250 mg vial with 5 mL of Sterile Water for Injection, USP. Gently swirl until all material is dissolved. Each reconstituted vial should be further diluted in 500 mL of 5% Dextrose in Water or 0.9% Sodium Chloride for Injection to yield a final concentration of 0.5 mg/mL. The infusion rate to be administered should be selected from the right-hand column in Table 1.


































































































Table 1. Dosing Table
Using 5 mg/mL

Concentration
Using 0.5 mg/mL

Concentration
 Weight

(kg)
Bolus

0.75 mg/k

(mL)
Infusion

1.75 mg/kg/h

(mL/h)
Subsequent

Low-rate Infusion

0.2 mg/kg/h

(mL/h)
43-4771618
48-527.517.520
53-5781922
58-6292124
63-67102326
68-7210.524.528
73-77112630
78-82122832
83-87133034
88-9213.531.536
93-97143338
98-102153540
103-107163742
108-11216.538.544
113-117174046
118-122184248
123-127194450
128-13219.545.552
133-137204754
138-142214956
143-147225158
148-15222.552.560

Angiomax should be administered via an intravenous line. No incompatibilities have been observed with glass bottles or polyvinyl chloride bags and administration sets. The following drugs should not be administered in the same intravenous line with Angiomax, since they resulted in haze formation, microparticulate formation, or gross precipitation when mixed with Angiomax: alteplase, amiodarone HCl, amphotericin B, chlorpromazine HCl, diazepam, prochlorperazine edisylate, reteplase, streptokinase, and vancomycin HCl. Dobutamine was compatible at concentrations up to 4 mg/mL but incompatible at a concentration of 12.5 mg/mL.


Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration. Preparations of Angiomax containing particulate matter should not be used. Reconstituted material will be a clear to slightly opalescent, colorless to slightly yellow solution.



  Storage after Reconstitution


Do not freeze reconstituted or diluted Angiomax. Reconstituted material may be stored at 2-8°C for up to 24 hours. Diluted Angiomax with a concentration of between 0.5 mg/mL and 5 mg/mL is stable at room temperature for up to 24 hours. Discard any unused portion of reconstituted solution remaining in the vial.



 DOSAGE FORMS AND STRENGTHS


Angiomax is supplied as a sterile, lyophilized powder in single-use, glass vials. After reconstitution, each vial delivers 250 mg of Angiomax.



 CONTRAINDICATIONS


Angiomax is contraindicated in patients with:


  • Active major bleeding;

  • Hypersensitivity (e.g., anaphylaxis) to Angiomax or its components [see Adverse Reactions (6.3)].


 WARNINGS AND PRECAUTIONS



  Bleeding Events


Although most bleeding associated with the use of Angiomax in PCI/PTCA occurs at the site of arterial puncture, hemorrhage can occur at any site. An unexplained fall in blood pressure or hematocrit should lead to serious consideration of a hemorrhagic event and cessation of Angiomax administration [see Adverse Reactions (6.1)]. Angiomax should be used with caution in patients with disease states associated with an increased risk of bleeding.



  Coronary Artery Brachytherapy


An increased risk of thrombus formation, including fatal outcomes, has been associated with the use of Angiomax in gamma brachytherapy.


If a decision is made to use Angiomax during brachytherapy procedures, maintain meticulous catheter technique, with frequent aspiration and flushing, paying special attention to minimizing conditions of stasis within the catheter or vessels [see Adverse Reactions (6.3)].



 ADVERSE REACTIONS



  Clinical Trials Experience


Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice.




Bleeding


In 6010 patients undergoing PCI treated in the REPLACE-2 trial, Angiomax patients exhibited statistically significantly lower rates of bleeding, transfusions, and thrombocytopenia as noted in Table 2.








































































Table 2. Major Hematologic Outcomes REPLACE-2 Study (Safety Population)
Angiomax with "provisional" GPI1

(n=2914)
HEPARIN + GPI

(n=2987)
p-value
1 GPIs were administered to 7.2% of patients in the Angiomax with provisional GPI group

2 Defined as the occurence of any of the following: intracranial bleeding, retroperitoneal bleeding, a transfusion of ≥2 units of blood/blood products, a fall in hemoglobin >4 g/dL, whether of not bleeding site is identified, spontaneous or non-spontaneous blood loss with a decrease in hemoglobin >3 g/dL

3 Defined as observed bleeding that does not meet the criteria for major hemorrhage

4 TIMI major bleeding is defined as intracranial, or a fall in adjusted Hgb >5 g/dL or Hct of >15%: TIMI minor bleeding is defined as a fall in adjusted Hgb of 3 to <5 g/dL or a fall in adjusted Hct of 9 to <15%, with a bleeding site such as hematuria, hematemesis, hematomas, retroperitoneal bleeding or a decrease in Hgb of >4 g/dL with no bleeding site

5 If <100,000 and >25% reduction from baseline, or <50,000
Protocol defined major hemorrhage2 (%)2.3%4.0%<0.001
Protocol defined minor hemorrhage3 (%)13.6%25.8%<0.001
TIMI defined bleeding4
  - Major0.6%0.9%0.259
  - Minor1.3%2.9<0.001
Non-access site bleeding
  - Retroperitoneal bleeding0.2%0.5%0.069
  - Intracranial bleeding<0.1%0.1%1.0
Access site bleeding
  - Sheath site bleeding0.9%2.4%<0.001
Thrombocytopenia5
  <100,0000.7%1.7%<0.001
  <50,0000.3%0.6%0.039
Transfusions
  - RBC1.3%1.9%0.08
  - Platelets0.3%0.6%0.095

In 4312 patients undergoing PTCA for treatment of unstable angina in 2 randomized, double-blind studies comparing Angiomax to heparin, Angiomax patients exhibited lower rates of major bleeding and lower requirements for blood transfusions. The incidence of major bleeding is presented in Table 3. The incidence of major bleeding was lower in the Angiomax group than in the heparin group.

























Table 3. Major Bleeding and Transfusions in BAT Trial (all patients)1
Angiomax

N=2161
Heparin

N=2151
1 No monitoring of ACT (or PTT) was done after a target ACT was achieved.

2 Major hemorrhage was defined as the occurence of any of the following, intracranial bleeding, retroperitoneal bleeding, clinically overt bleeding with a decrease in hemoglobin ≥3 g/dL or leading to a transfusion of ≥2 units of blood. This table includes data from the entire hospitalization period.
No. (%) Patients with Major hemorrhage279 (3.7)199 (9.3)
  - with ≥3 g/dL fall in Hgb41 (1.9)124 (5.8)
  - with ≥5 g/dL fall in Hgb14 (0.6)47 (2.2)
  - retroperitoneal bleeding5 (0.2)15 (0.7)
  - intracranial bleeding1 (<0.1)2 (0.1)
  - Required transfusions43 (2.0)123 (5.7)

In the AT-BAT study, of the 51 patients with HIT/HITTS, 1 patient who did not undergo PCI had major bleeding during CABG on the day following angiography. Nine patients had minor bleeding (mostly due to access site bleeding), and 2 patients developed thrombocytopenia.




Other Adverse Reactions


Adverse reactions, other than bleeding, observed in clinical trials were similar between the Angiomax treated patients and the control groups.


Adverse reactions (related adverse events ) seen in clinical studies in patients undergoing PCI and PTCA are shown in Tables 4 and 5.






























































Table 4. Most frequent (≥0.2%) treatment-related adverse events (reactions) (through 30 days) in the REPLACE-2 Safety population
Angiomax with

"provisional"

GPI1

(N = 2914)
Heparin+GPI

(N = 2987)
Note: A patient could have more than one event in any category.

Abbreviation: AE = adverse event.
n(%)n(%)
Patients with at least one treatment-related AE78(2.7)115(3.9)
 
Thrombocytopenia9(0.3)30(1.0)
Nausea15(0.5)7(0.2)
Hypotension7(0.2)11(0.4)
Angina pectoris5(0.2)12(0.4)
Headache6(0.2)5(0.2)
Injection site pain3(0.1)8(0.3)
Nausea and vomiting2(0.1)6(0.2)
Vomiting3(0.1)5(0.2)







































































Table 5. Adverse Events Other Than Bleeding Occurring In ≥5% Of Patients In Either Treatment Group In BAT Trial
Treatment Group
EVENTAngiomax

N=2161
Heparin

N=2151
Number of Patients (%)
CARDIOVASCULAR
    Hypotension262 (12)371 (17)
    Hypertension135 (6)115 (5)
    Bradycardia118 (5)164 (8)
GASTROINTESTINAL
    Nausea318 (15)347 (16)
    Vomiting138 (6)169 (8)
    Dyspepsia100 (5)111 (5)
GENITOURINARY
    Urinary retention89 (4)98 (5)
MISCELLANEOUS
    Back pain916 (42)944 (44)
    Pain330 (15)358 (17)
    Headache264 (12)225 (10)
    Injection site pain174 (8)274 (13)
    Insomnia142 (7)139 (6)
    Pelvic pain130 (6)169 (8)
    Anxiety127 (6)140 (7)
    Abdominal pain103 (5)104 (5)
    Fever103 (5)108 (5)
    Nervousness102 (5)87 (4)

Serious, non-bleeding adverse events were experienced in 2% of 2161 Angiomax-treated patients and 2% of 2151 heparin-treated patients. The following individual serious non-bleeding adverse events were rare (>0.1% to <1%) and similar in incidence between Angiomax- and heparin-treated patients. These events are listed by body system: Body as a Whole:  fever, infection, sepsis; Cardiovascular:  hypotension, syncope, vascular anomaly, ventricular fibrillation; Nervous:  cerebral ischemia, confusion, facial paralysis; Respiratory:  lung edema; Urogenital:  kidney failure, oliguria. In the BAT trial, there was no causality assessment for adverse events.



  Immunogenicity/Re-Exposure


In in vitro studies, Angiomax exhibited no platelet aggregation response against sera from patients with a history of HIT/HITTS.


Among 494 subjects who received Angiomax in clinical trials and were tested for antibodies, 2 subjects had treatment-emergent positive bivalirudin antibody tests. Neither subject demonstrated clinical evidence of allergic or anaphylactic reactions and repeat testing was not performed. Nine additional patients who had initial positive tests were negative on repeat testing.



  Postmarketing Experience


Because postmarketing adverse reactions are reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure.


The following adverse reactions have been identified during postapproval use of Angiomax: fatal bleeding; hypersensitivity and allergic reactions including reports of anaphylaxis; lack of anticoagulant effect; thrombus formation during PCI with and without intracoronary brachytherapy, including reports of fatal outcomes.



 DRUG INTERACTIONS


In clinical trials in patients undergoing PCI/PTCA, co-administration of Angiomax with heparin, warfarin, thrombolytics, or GPIs was associated with increased risks of major bleeding events compared to patients not receiving these concomitant medications.


There is no experience with co-administration of Angiomax and plasma expanders such as dextran.



 USE IN SPECIFIC POPULATIONS



  Pregnancy


Pregnancy Category B


Reproductive studies have been performed in rats at subcutaneous doses up to 150 mg/kg/day, (1.6 times the maximum recommended human dose based on body surface area) and rabbits at subcutaneous doses up to 150 mg/kg/day (3.2 times the maximum recommended human dose based on body surface area). These studies revealed no evidence of impaired fertility or harm to the fetus attributable to Angiomax. There are, however, no adequate and well-controlled studies in pregnant women. Because animal reproduction studies are not always predictive of human response, this drug should be used during pregnancy only if clearly needed.


Angiomax is intended for use with aspirin [see Indications and Usage (1.3)]. Because of possible adverse effects on the neonate and the potential for increased maternal bleeding, particularly during the third trimester, Angiomax and aspirin should be used together during pregnancy only if clearly needed.



  Nursing Mothers


It is not known whether bivalirudin is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when Angiomax is administered to a nursing woman.



  Pediatric Use


The safety and effectiveness of Angiomax in pediatric patients have not been established.



  Geriatric Use


In studies of patients undergoing PCI, 44% were ≥65 years of age and 12% of patients were ≥75 years old. Elderly patients experienced more bleeding events than younger patients. Patients treated with Angiomax experienced fewer bleeding events in each age stratum, compared to heparin.



  Renal Impairment


The disposition of Angiomax was studied in PTCA patients with mild, moderate and severe renal impairment. The clearance of Angiomax was reduced approximately 20% in patients with moderate and severe renal impairment and was reduced approximately 80% in dialysis-dependent patients. [see Clinical Pharmacology (12.3)].


The infusion dose of Angiomax may need to be reduced, and anticoagulant status monitored in patients with renal impairment [see Dosage and Administration (2.2)].



 OVERDOSAGE


Single bolus doses of Angiomax up to 7.5 mg/kg have been reported without associated bleeding or other adverse reactions. In cases of overdosage, treatment with Angiomax should be immediately discontinued and the patient monitored closely for signs of bleeding. Angiomax is hemodialyzable [see Clinical Pharmacology (12.3)]. There is no known antidote to Angiomax.



 DESCRIPTION


Angiomax is a specific and reversible direct thrombin inhibitor. The active substance is a synthetic, 20 amino acid peptide. The chemical name is D - phenylalanyl - L - prolyl - L - arginyl - L - prolyl - glycyl - glycyl - glycyl - glycyl - L - asparagyl - glycyl - L - aspartyl - L - phenylalanyl - L - glutamyl - L - glutamyl - L - isoleucyl - L - prolyl - L - glutamyl - L - glutamyl - L - tyrosyl - L - leucine trifluoroacetate (salt) hydrate (Figure 1). The molecular weight of Angiomax is 2180 daltons (anhydrous free base peptide).


Angiomax is supplied in single-use vials as a white lyophilized cake, which is sterile. Each vial contains 250 mg bivalirudin, 125 mg mannitol, and sodium hydroxide to adjust the pH to 5-6 (equivalent of approximately 12.5 mg sodium). When reconstituted with Sterile Water for Injection, the product yields a clear to opalescent, colorless to slightly yellow solution, pH 5-6.




Figure 1. Structural Formula for Bivalirudin



 CLINICAL PHARMACOLOGY



  Mechanism of Action


Angiomax directly inhibits thrombin by specifically binding both to the catalytic site and to the anion-binding exosite of circulating and clot-bound thrombin. Thrombin is a serine proteinase that plays a central role in the thrombotic process, acting to cleave fibrinogen into fibrin monomers and to activate Factor XIII to Factor XIIIa, allowing fibrin to develop a covalently cross-linked framework which stabilizes the thrombus; thrombin also activates Factors V and VIII, promoting further thrombin generation, and activates platelets, stimulating aggregation and granule release. The binding of Angiomax to thrombin is reversible as thrombin slowly cleaves the Angiomax-Arg3-Pro4 bond, resulting in recovery of thrombin active site functions.


In in vitro studies, Angiomax inhibited both soluble (free) and clot-bound thrombin, was not neutralized by products of the platelet release reaction, and prolonged the activated partial thromboplastin time (aPTT), thrombin time (TT), and prothrombin time (PT) of normal human plasma in a concentration-dependent manner. The clinical relevance of these findings is unknown.



  Pharmacodynamics


In healthy volunteers and patients (with ≥70% vessel occlusion undergoing routine PTCA), Angiomax exhibited dose- and concentration-dependent anticoagulant activity as evidenced by prolongation of the ACT, aPTT, PT, and TT. Intravenous administration of Angiomax produces an immediate anticoagulant effect. Coagulation times return to baseline approximately 1 hour following cessation of Angiomax administration.


In 291 patients with ≥70% vessel occlusion undergoing routine PTCA , a positive correlation was observed between the dose of Angiomax and the proportion of patients achieving ACT values of 300 sec or 350 sec. At an Angiomax dose of 1 mg/kg IV bolus plus 2.5 mg/kg/h IV infusion for 4 hours, followed by 0.2 mg/kg/h, all patients reached maximal ACT values >300 sec.



  Pharmacokinetics


Angiomax exhibits linear pharmacokinetics following IV administration to patients undergoing PTCA. In these patients, a mean steady state Angiomax concentration of 12.3 ± 1.7 mcg/mL is achieved following an IV bolus of 1 mg/kg and a 4-hour 2.5 mg/kg/h IV infusion. Angiomax does not bind to plasma proteins (other than thrombin) or to red blood cells. Angiomax is cleared from plasma by a combination of renal mechanisms and proteolytic cleavage, with a half-life in patients with normal renal function of 25 min.


The disposition of Angiomax was studied in PTCA patients with mild, moderate, and severe renal impairment. Drug elimination was related to glomerular filtration rate (GFR). Total body clearance was similar for patients with normal renal function and with mild renal impairment (60-89 mL/min). Clearance was reduced in patients with moderate and severe renal impairment and in dialysis-dependent patients (See Table 6 for pharmacokinetic parameters).


Angiomax is hemodialyzable, with approximately 25% cleared by hemodialysis.






















Table 6. PK Parameters in Patients with Renal Impairment*
Renal Function (GFR, mL/min)Clearance

(mL/min/kg)
Half-life

(min)
* The ACT should be monitored in renally-impaired patients
Normal renal function (≥90 mL/min)3.425
Mild renal impairment (60-89 mL/min)3.422
Moderate renal impairment (30-59 mL/min)2.734
Severe renal impairment (10-29 mL/min)2.857
Dialysis-dependent patients (off dialysis)1.03.5 hours

 NONCLINICAL TOXICOLOGY



  Carcinogenesis, Mutagenesis, Impairment of Fertility


No long-term studies in animals have been performed to evaluate the carcinogenic potential of Angiomax. Angiomax displayed no genotoxic potential in the in vitro bacterial cell reverse mutation assay (Ames test), the in vitro Chinese hamster ovary cell forward gene mutation test (CHO/HGPRT), the in vitro human lymphocyte chromosomal aberration assay, the in vitro rat hepatocyte unscheduled DNA synthesis (UDS) assay, and the in vivo rat micronucleus assay. Fertility and general reproductive performance in rats were unaffected by subcutaneous doses of Angiomax up to 150 mg/kg/day, about 1.6 times the dose on a body surface area basis (mg/m2) of a 50 kg person given the maximum recommended dose of 15 mg/kg/day.



 CLINICAL STUDIES



  PCI/PTCA


Angiomax has been evaluated in five randomized, controlled interventional cardiology trials reporting 11,422 patients. Stents were deployed in 6062 of the patients in these trials - mainly in trials performed since 1995. Percutaneous transluminal coronary angioplasty, atherectomy or other procedures were performed in the remaining patients.




REPLACE-2 Trial


This was a randomized, double-blind, multicenter study reporting 6002 (intent-to-treat) patients undergoing PCI. Patients were randomized to treatment with Angiomax with the "provisional" use of platelet glycoprotein IIb/IIIa inhibitor (GPI) or heparin plus planned use of GPI. GPIs were added on a "provisional" basis to patients who were randomized to Angiomax in the following circumstances:


  • decreased TIMI flow (0 to 2) or slow reflow;

  • dissection with decreased flow;

  • new or suspected thrombus;

  • persistent residual stenosis;

  • distal embolization;

  • unplanned stent;

  • suboptimal stenting;

  • side branch closure;

  • abrupt closure; clinical instability; and

  • prolonged ischemia.

During the study, one or more of these circumstances occurred in 12.7% of patients in the Angiomax with provisional GPI arm. GPIs were administered to 7.2% of patients in the Angiomax with provisional GPI arm (62.2% of eligible patients).


Patients ranged in age from 25-95 years (median, 63); weight ranged from 35-199 kg (median 85.5); 74.4% were male and 25.6% were female. Indications for PCI included unstable angina (35% of patients), myocardial infarction within 7 days prior to intervention (8% of patients), stable angina (25%) and positive ischemic stress test (24%). Stents were deployed in 85% of patients. Ninety-nine percent of patients received aspirin and 86% received thienopyridines prior to study treatment.


Angiomax was administered as a 0.75 mg/kg bolus followed by a 1.75 mg/kg/h infusion for the duration of the procedure. The activated clotting time (ACT - measured by a Hemochron® device) was measured 5 min after the first bolus of study medication. If the ACT was <225 seconds, an additional bolus of 0.3 mg/kg was given. At investigator discretion, the infusion could be continued following the procedure for up to 4 hours. The median infusion duration was 44 min. Heparin was administered as a 65 U/kg bolus. The activated clotting time (ACT - measured by a Hemochron® device) was measured 5 min after the first bolus of study medication. If the ACT was <225 seconds, an additional bolus of 20 units/kg was given. GPIs (either abciximab or eptifibatide) were given according to manufacturers' instructions. Both randomized groups could be given "provisional" treatments during the PCI at investigator discretion, but under double-blind conditions. "Provisional" treatment with GPI was requested in 5.2% of patients randomized to heparin plus GPI (they were given placebo) and 7.2% patients randomized to Angiomax with provisional GPI (they were given abciximab or eptifibatide according to pre-randomization investigator choice and patient stratification).


The percent of patients reaching protocol-specified levels of anticoagulation was greater in the Angiomax with provisional GPI group than in the heparin plus GPI group. For patients randomized to Angiomax with provisional GPI, the median 5 min ACT was 358 sec (interquartile range 320-400 sec) and the ACT was <225 sec in 3%. For patients randomized to heparin plus GPI, the median 5 min ACT was 317 sec (interquartile range 263-373 sec) and the ACT was <225 sec in 12%. At the end of the procedure, median ACT values were 334 sec (Angiomax group) and 276 sec (heparin plus GPI group).


For the composite endpoint of death, MI, or urgent revascularization adjudicated under double-blind conditions, the frequency was higher (7.6%)(95% confidence interval 6.7%-8.6%) in the Angiomax with "provisional" GPI arm when compared to the heparin plus GPI arm (7.1%)(95% confidence interval 6.1%-8.0%). However, major hemorrhage was reported significantly less frequently in the Angiomax with provisional GPI arm (2.4%) compared to the heparin plus GPI arm (4.1%). Study outcomes are shown in Table 7.




























Table 7. Incidences of Clinical Endpoints at 30 Days for REPLACE-2, a Randomized Double-blind Clinical Trial
Intent-to-treat PopulationAngiomax with

"Provisional" GPI

n=2994
HEPARIN+GPI

n=3008
* Defined as intracranial bleeding, retroperitoneal bleeding, a transfusion of ≥2 units of blood/blood products, a fall in Hgb >4 g/dL, whether or not bleeding site is identified, spontaneous or non-spontaneous blood loss with a decrease in Hgb >3 g/dL.

† p-value <0.001 between groups.
Efficacy Endpoints
   Death, MI, or urgent revascularization7.6%7.1%
      Death0.2%0.4%
      MI7.0%6.2%
      Urgent revascularization1.2%1.4%
Safety Endpoint
   Major hemorrhage*†2.4%4.1%

At 12 months' follow-up, mortality was 1.9% among patients randomized to Angiomax with "provisional" GPIs and 2.5% among patients randomized to heparin plus GPI.




Bivalirudin Angioplasty Trial (BAT)


Angiomax was evaluated in patients with unstable angina undergoing PTCA in two randomized, double-blind, multicenter studies with identical protocols. Patients must have had unstable angina defined as: (1) a new onset of severe or accelerated angina or rest pain within the month prior to study entry or (2) angina or ischemic rest pain which developed between four hours and two weeks after an acute myocardial infarction (MI). Overall, 4312 patients with unstable angina, including 741 (17%) patients with post-MI angina, were treated in a 1:1 randomized fashion with Angiomax or heparin. Patients ranged in age from 29-90 (median 63) years, their weight was a median of 80 kg (39-120 kg), 68% were male, and 91% were Caucasian. Twenty-three percent of patients were treated with heparin within one hour prior to randomization. All patients were administered aspirin 300-325 mg prior to PTCA and daily thereafter. Patients randomized to Angiomax were started on an intravenous infusion of Angiomax (2.5 mg/kg/h). Within 5 min after starting the infusion, and prior to PTCA, a 1 mg/kg loading dose was administered as an intravenous bolus. The infusion was continued for 4 hours, then the infusion was changed under double-blinded conditions to Angiomax (0.2 mg/kg/h) for up to an additional 20 hours (patients received this infusion for an average of 14 hours). The ACT was checked at 5 min and at 45 min following commencement. If on either occasion the ACT was <350 sec, an additional double-blinded bolus of placebo was administered. The Angiomax dose was not titrated to ACT. Median ACT values were: ACT in sec (5th percentile-95th percentile): 345 sec (240-595 sec) at 5 min and 346 sec (range 269-583 sec) at 45 min after initiation of dosing. Patients randomized to heparin were given a loading dose (175 IU/kg) as an intravenous bolus 5 min before the planned procedure, with immediate commencement of an infusion of heparin (15 IU/kg/h). The infusion was continued for 4 hours. After 4 hours of infusion, the heparin infusion was changed under double-blinded conditions to heparin (15 IU/kg/h) for up to 20 additional hours. The ACT was checked at 5 min and at 45 m

Wednesday, June 20, 2012

Stromectol


Generic Name: ivermectin (eye ver MEK tin)

Brand Names: Stromectol


What is Stromectol (ivermectin)?

Ivermectin is an anti-parasite medication. It causes the death of certain parasitic organisms in the body.


Ivermectin is used to treat infections caused by certain parasites.


Ivermectin may also be used for purposes other than those listed in this medication guide.


What is the most important information I should know about Stromectol (ivermectin)?


Before taking ivermectin, tell your doctor about any other medical conditions that you have, especially liver disease. If you have liver problems, you may not be able to use ivermectin, or you may need a dosage adjustment or special tests during treatment. Treatment with ivermectin usually involves taking a single dose, which should be taken on an empty stomach with a full glass of water.

To be sure this medication is helping your condition, a sample of your stool (bowel movement) will need to be checked on a regular basis. It is important that you not miss any scheduled visits to your doctor.


Avoid drinking alcohol, which can increase some of the side effects of ivermectin.

You may need to be retreated with ivermectin several months to a year after your single dose.


Call your doctor at once if you have any problems with your eyes or your vision.

What should I discuss with my healthcare provider before taking Stromectol (ivermectin)?


Before taking ivermectin, tell your doctor about any other medical conditions that you have, especially liver disease. If you have liver problems, you may not be able to use ivermectin, or you may need a dosage adjustment or special tests during treatment. FDA pregnancy category C. This medication may be harmful to an unborn baby. Tell your doctor if you are pregnant or plan to become pregnant during treatment. Ivermectin can pass into breast milk and may harm a nursing baby. Do not use this medication without telling your doctor if you are breast-feeding a baby.

How should I take Stromectol (ivermectin)?


Treatment with ivermectin usually involves taking a single dose, which should be taken on an empty stomach with a full glass of water.

To be sure this medication is helping your condition, a sample of your stool (bowel movement) will need to be checked on a regular basis. It is important that you not miss any scheduled visits to your doctor.


You may need to be retreated with ivermectin several months to a year after your single dose.


If you store ivermectin at home, keep it at room temperature away from moisture and heat.

See also: Stromectol dosage (in more detail)

What happens if I miss a dose?


Since ivermectin is usually given as a single dose, you will probably not be on a dosing schedule. If you are taking a repeat dose of ivermectin and you miss the dose, call your doctor for instructions.


What happens if I overdose?


Seek emergency medical attention if you think you have taken too much of this medicine.

An overdose of ivermectin may cause skin rash, swelling, headache, dizziness, weakness, nausea, vomiting, diarrhea, stomach pain, seizure (convulsions), shortness of breath, and numbness or tingling.


What should I avoid while taking Stromectol (ivermectin)?


Avoid drinking alcohol, which can increase some of the side effects of ivermectin.

Stromectol (ivermectin) side effects


Get emergency medical help if you have any of these signs of an allergic reaction: hives; difficulty breathing; swelling of your face, lips, tongue, or throat. Call your doctor at once if you have any of these serious side effects:

  • vision changes or problems with your vision;




  • urinary or bowel problems;




  • weakness, confusion, lack of coordination;




  • eye redness, swelling, or pain; or




  • seizure (convulsions).



Other less serious side effects may be more likely to occur, such as:



  • nausea, diarrhea;




  • dizziness;




  • swelling of your hands, ankles, or feet;




  • swelling or tenderness of your lymph nodes;




  • itching or skin rash; or




  • feeling that something is in your eye(s).



Side effects other than those listed here may also occur. Talk to your doctor about any side effect that seems unusual or that is especially bothersome. You may report side effects to FDA at 1-800-FDA-1088.


What other drugs will affect Stromectol (ivermectin)?


There may be other drugs that can affect ivermectin. Tell your doctor about all the prescription and over-the-counter medications you use. This includes vitamins, minerals, herbal products, and drugs prescribed by other doctors. Do not start using a new medication without telling your doctor.



More Stromectol resources


  • Stromectol Side Effects (in more detail)
  • Stromectol Dosage
  • Stromectol Use in Pregnancy & Breastfeeding
  • Drug Images
  • Stromectol Drug Interactions
  • Stromectol Support Group
  • 2 Reviews for Stromectol - Add your own review/rating


  • Stromectol Prescribing Information (FDA)

  • Stromectol MedFacts Consumer Leaflet (Wolters Kluwer)

  • Stromectol Monograph (AHFS DI)

  • Stromectol Advanced Consumer (Micromedex) - Includes Dosage Information

  • Ivermectin Prescribing Information (FDA)



Compare Stromectol with other medications


  • Ascariasis
  • Cutaneous Larva Migrans
  • Filariasis, Elephantiasis
  • Head Lice
  • Onchocerciasis, River Blindness
  • Scabies
  • Strongyloidiasis


Where can I get more information?


  • Your pharmacist has more information about ivermectin written for health professionals that you may read.

See also: Stromectol side effects (in more detail)


Tuesday, June 19, 2012

Mucopolysaccharidosis Type II Medications


Drugs associated with Mucopolysaccharidosis Type II

The following drugs and medications are in some way related to, or used in the treatment of Mucopolysaccharidosis Type II. This service should be used as a supplement to, and NOT a substitute for, the expertise, skill, knowledge and judgment of healthcare practitioners.





Drug List:

Friday, June 15, 2012

Mucous Plugging in Lung Disease Medications


There are currently no drugs listed for "Mucous Plugging in Lung Disease".





Drug List:

Sunday, June 10, 2012

Zinc-220


Generic Name: zinc supplement (Oral route, Parenteral route)


Commonly used brand name(s)

In the U.S.


  • Galzin

  • M2 Zinc 50

  • Orazinc 110

  • Orazinc 220

  • Zinc-220

  • Zinc Chelated

  • Zn Plus Protein

In Canada


  • Prostavan

Available Dosage Forms:


  • Tablet

  • Capsule

  • Tablet, Extended Release

Uses For Zinc-220


Zinc supplements are used to prevent or treat zinc deficiency.


The body needs zinc for normal growth and health. For patients who are unable to get enough zinc in their regular diet or who have a need for more zinc, zinc supplements may be necessary. They are generally taken by mouth but some patients may have to receive them by injection.


Zinc supplements may be used for other conditions as determined by your health care professional.


Lack of zinc may lead to poor night vision and wound-healing, a decrease in sense of taste and smell, a reduced ability to fight infections, and poor development of reproductive organs.


  • Acrodermatitis enteropathica (a lack of absorption of zinc from the intestine)

  • Alcoholism

  • Burns

  • Type 2 diabetes mellitus

  • Down's syndrome

  • Eating disorders

  • Intestine diseases

  • Infections (continuing or chronic)

  • Kidney disease

  • Liver disease

  • Pancreas disease

  • Sickle cell disease

  • Skin disorders

  • Stomach removal

  • Stress (continuing)

  • Thalassemia

  • Trauma (prolonged)

In addition, premature infants may need additional zinc.


Increased need for zinc should be determined by your health care professional.


Claims that zinc is effective in preventing vision loss in the elderly have not been proven. Zinc has not been proven effective in the treatment of porphyria.


Injectable zinc is given by or under the supervision of a health care professional. Other forms of zinc are available without a prescription.


Once a medicine or dietary supplement has been approved for marketing for a certain use, experience may show that it is also useful for other medical problems. Although this use is not included in product labeling, zinc supplements are used in certain patients with the following medical condition:


  • Wilson's disease (a disease of too much copper in the body)

Importance of Diet


For good health, it is important that you eat a balanced and varied diet. Follow carefully any diet program your health care professional may recommend. For your specific dietary vitamin and/or mineral needs, ask your health care professional for a list of appropriate foods. If you think that you are not getting enough vitamins and/or minerals in your diet, you may choose to take a dietary supplement.


Zinc is found in various foods, including lean red meats, seafood (especially herring and oysters), peas, and beans. Zinc is also found in whole grains; however, large amounts of whole-grains have been found to decrease the amount of zinc that is absorbed. Additional zinc may be added to the diet through treated (galvanized) cookware. Foods stored in uncoated tin cans may cause less zinc to be available for absorption from food.


The daily amount of zinc needed is defined in several different ways.


  • For U.S.—

  • Recommended Dietary Allowances (RDAs) are the amount of vitamins and minerals needed to provide for adequate nutrition in most healthy persons. RDAs for a given nutrient may vary depending on a person's age, sex, and physical condition (e.g., pregnancy).

  • Daily Values (DVs) are used on food and dietary supplement labels to indicate the percent of the recommended daily amount of each nutrient that a serving provides. DV replaces the previous designation of United States Recommended Daily Allowances (USRDAs).

  • For Canada—

  • Recommended Nutrient Intakes (RNIs) are used to determine the amounts of vitamins, minerals, and protein needed to provide adequate nutrition and lessen the risk of chronic disease.

Normal daily recommended intakes in milligrams (mg) for zinc are generally defined as follows:


























PersonsU.S. (mg)Canada (mg)
Infants and children birth to

3 years of age
5–102–4
Children 4 to 6 years of age105
Children 7 to 10 years of age107–9
Adolescent and adult males159–12
Adolescent and adult females129
Pregnant females1515
Breast-feeding females16–1915

Before Using Zinc-220


If you are taking a dietary supplement without a prescription, carefully read and follow any precautions on the label. For these supplements, the following should be considered:


Allergies


Tell your doctor if you have ever had any unusual or allergic reaction to medicines in this group or any other medicines. Also tell your health care professional if you have any other types of allergies, such as to foods dyes, preservatives, or animals. For non-prescription products, read the label or package ingredients carefully.


Pediatric


Problems in children have not been reported with intake of normal daily recommended amounts.


Geriatric


Problems in older adults have not been reported with intake of normal daily recommended amounts. There is some evidence that the elderly may be at risk of becoming deficient in zinc due to poor food selection, decreased absorption of zinc by the body, or medicines that decrease absorption of zinc or increase loss of zinc from the body.


Pregnancy


It is especially important that you are receiving enough vitamins and minerals when you become pregnant and that you continue to receive the right amount of vitamins and minerals throughout your pregnancy. The healthy growth and development of the fetus depend on a steady supply of nutrients from the mother. There is evidence that low blood levels of zinc may lead to problems in pregnancy or defects in the baby. However, taking large amounts of a dietary supplement in pregnancy may be harmful to the mother and/or fetus and should be avoided.


Breast Feeding


It is important that you receive the right amounts of vitamins and minerals so that your baby will also get the vitamins and minerals needed to grow properly. However, taking large amounts of a dietary supplement while breast-feeding may be harmful to the mother and/or baby and should be avoided.


Interactions with Medicines


Although certain medicines should not be used together at all, in other cases two different medicines may be used together even if an interaction might occur. In these cases, your doctor may want to change the dose, or other precautions may be necessary. When you are taking any of these dietary supplements, it is especially important that your healthcare professional know if you are taking any of the medicines listed below. The following interactions have been selected on the basis of their potential significance and are not necessarily all-inclusive.


Using dietary supplements in this class with any of the following medicines is usually not recommended, but may be required in some cases. If both medicines are prescribed together, your doctor may change the dose or how often you use one or both of the medicines.


  • Amygdalin

  • Deferoxamine

  • Eltrombopag

Interactions with Food/Tobacco/Alcohol


Certain medicines should not be used at or around the time of eating food or eating certain types of food since interactions may occur. Using alcohol or tobacco with certain medicines may also cause interactions to occur. Discuss with your healthcare professional the use of your medicine with food, alcohol, or tobacco.


Other Medical Problems


The presence of other medical problems may affect the use of dietary supplements in this class. Make sure you tell your doctor if you have any other medical problems, especially:


  • Copper deficiency—Zinc supplements may make this condition worse.

Proper Use of zinc supplement

This section provides information on the proper use of a number of products that contain zinc supplement. It may not be specific to Zinc-220. Please read with care.


Zinc supplements are most effective if they are taken at least 1 hour before or 2 hours after meals. However, if zinc supplements cause stomach upset, they may be taken with a meal. You should tell your health care professional if you are taking your zinc supplement with meals.


Dosing


The dose medicines in this class will be different for different patients. Follow your doctor's orders or the directions on the label. The following information includes only the average doses of these medicines. If your dose is different, do not change it unless your doctor tells you to do so.


The amount of medicine that you take depends on the strength of the medicine. Also, the number of doses you take each day, the time allowed between doses, and the length of time you take the medicine depend on the medical problem for which you are using the medicine.


  • For oral dosage forms (capsules, lozenges, tablets, extended-release tablets):
    • To prevent deficiency, the amount taken by mouth is based on normal daily recommended intakes (Note that the normal daily recommended intakes are expressed as an actual amount of zinc. The dosage form [e.g., zinc gluconate, zinc sulfate] has a different strength):
      • For the U.S

      • Adult and teenage males—15 milligrams (mg) per day.

      • Adult and teenage females—12 mg per day.

      • Pregnant females—15 mg per day.

      • Breast-feeding females—16 to 19 mg per day.

      • Children 4 to 10 years of age—10 mg per day.

      • Children birth to 3 years of age—5 to 10 mg per day.

      • For Canada

      • Adult and teenage males—9 to 12 mg per day.

      • Adult and teenage females—9 mg per day.

      • Pregnant females—15 mg per day.

      • Breast-feeding females—15 mg per day.

      • Children 7 to 10 years of age—7 to 9 mg per day.

      • Children 4 to 6 years of age—5 mg per day.

      • Children birth to 3 years of age—2 to 4 mg per day.


    • To treat deficiency:
      • Adults, teenagers, and children—Treatment dose is determined by prescriber for each individual based on severity of deficiency.



Missed Dose


If you miss a dose of this medicine, take it as soon as possible. However, if it is almost time for your next dose, skip the missed dose and go back to your regular dosing schedule. Do not double doses.


If you miss taking zinc supplements for one or more days there is no cause for concern, since it takes some time for your body to become seriously low in zinc. However, if your health care professional has recommended that you take zinc, try to remember to take it as directed every day.


Storage


Keep out of the reach of children.


Store the medicine in a closed container at room temperature, away from heat, moisture, and direct light. Keep from freezing.


Do not keep outdated medicine or medicine no longer needed.


Precautions While Using Zinc-220


When zinc combines with certain foods it may not be absorbed into your body and it will do you no good. If you are taking zinc, the following foods should be avoided or taken 2 hours after you take zinc:


  • Bran

  • Fiber-containing foods

  • Phosphorus-containing foods such as milk or poultry

  • Whole-grain breads and cereals

Do not take zinc supplements and copper, iron, or phosphorus supplements at the same time. It is best to space doses of these products 2 hours apart, to get the full benefit from each dietary supplement.


Zinc-220 Side Effects


Along with its needed effects, a dietary supplement may cause some unwanted effects. Although not all of these side effects may occur, if they do occur they may need medical attention.


Check with your doctor as soon as possible if any of the following side effects occur:


Rare - With large doses
  • Chills

  • continuing ulcers or sores in mouth or throat

  • fever

  • heartburn

  • indigestion

  • nausea

  • sore throat

  • unusual tiredness or weakness

Symptoms of overdose
  • Chest pain

  • dizziness

  • fainting

  • shortness of breath

  • vomiting

  • yellow eyes or skin

Other side effects not listed may also occur in some patients. If you notice any other effects, check with your healthcare professional.


Call your doctor for medical advice about side effects. You may report side effects to the FDA at 1-800-FDA-1088.



The information contained in the Thomson Reuters Micromedex products as delivered by Drugs.com is intended as an educational aid only. It is not intended as medical advice for individual conditions or treatment. It is not a substitute for a medical exam, nor does it replace the need for services provided by medical professionals. Talk to your doctor, nurse or pharmacist before taking any prescription or over the counter drugs (including any herbal medicines or supplements) or following any treatment or regimen. Only your doctor, nurse, or pharmacist can provide you with advice on what is safe and effective for you.


The use of the Thomson Reuters Healthcare products is at your sole risk. These products are provided "AS IS" and "as available" for use, without warranties of any kind, either express or implied. Thomson Reuters Healthcare and Drugs.com make no representation or warranty as to the accuracy, reliability, timeliness, usefulness or completeness of any of the information contained in the products. Additionally, THOMSON REUTERS HEALTHCARE MAKES NO REPRESENTATION OR WARRANTIES AS TO THE OPINIONS OR OTHER SERVICE OR DATA YOU MAY ACCESS, DOWNLOAD OR USE AS A RESULT OF USE OF THE THOMSON REUTERS HEALTHCARE PRODUCTS. ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE ARE HEREBY EXCLUDED. Thomson Reuters Healthcare does not assume any responsibility or risk for your use of the Thomson Reuters Healthcare products.

Monday, June 4, 2012

vinblastine


Generic Name: vinblastine (vin BLAS teen)

Brand Names: Velban


What is vinblastine?

Vinblastine is cancer medication that interferes with the growth of cancer cells and slows their spread in the body.


Vinblastine is used to treat Hodgkin's disease, certain types of lymphoma, testicular cancer, breast cancer, choriocarcinoma (a type of uterine cancer), Kaposi's sarcoma, and Letterer-Siwe disease.


Vinblastine is often used in combination with other cancer medications.


Vinblastine may also be used for other purposes not listed in this medication guide.


What is the most important information I should know about vinblastine?


You should not use this medication if you are allergic to it, or if you have severely low white blood cell counts, or an untreated or uncontrolled bacterial infection. Do not use vinblastine if you are pregnant. It could harm the unborn baby. Use effective birth control, and tell your doctor if you become pregnant during treatment.

Before you receive vinblastine, tell your doctor if you have liver disease, wasting syndrome, skin ulcers, coronary artery disease, a history of blood clot or stroke, or cancer that has spread to your bone marrow.


Vinblastine is often used in combination with other cancer medications.


Tell your caregivers if you feel any burning, pain, or swelling around the IV needle when vinblastine is injected.

Vinblastine can lower blood cells that help your body fight infections. Avoid being near people who have colds, the flu, or other contagious illnesses. Your blood will need to be tested on a regular basis. Do not miss any scheduled appointments. Contact your doctor at once if you develop signs of infection.


Do not receive a "live" vaccine while you are being treated with vinblastine, and avoid coming into contact with anyone who has recently received a live vaccine. There is a chance that the virus could be passed on to you.

What should I discuss with my healthcare provider before receiving vinblastine?


You should not use this medication if you are allergic to it, or if you have:

  • severely low white blood cell counts; or




  • an untreated or uncontrolled bacterial infection.



If you have any of these other conditions, you may need a dose adjustment or special tests to safely use this medication:


  • liver disease;


  • wasting syndrome (decreased weight with loss of muscle tissue);




  • skin ulcers, bed sores;




  • coronary artery disease, a history of blood clot or stroke (including "mini-stroke"); or




  • cancer than has spread to your bone marrow.




FDA pregnancy category D. Vinblastine can cause harm to an unborn baby or cause birth defects. Before you receive vinblastine, tell your doctor if you are pregnant. Use an effective form of birth control, and tell your doctor if you become pregnant during treatment. It is not known whether vinblastine passes into breast milk or if it could harm a nursing baby. Before you receive this medication, tell your doctor if you are breast-feeding a baby.

How is vinblastine given?


Vinblastine is given as an injection through a needle placed into a vein. You will receive this injection in a clinic or hospital setting. The medicine must be given slowly through an IV infusion.


Vinblastine is usually given once every 7 days. Follow your doctor's instructions.


Tell your caregivers if you feel any burning, pain, or swelling around the IV needle when the medicine is injected.

Vinblastine can lower the blood cells that help your body fight infections. This can make it easier for you to bleed from an injury or get sick from being around others who are ill. To be sure your blood cells do not get too low, your blood will need to be tested on a regular basis. Your cancer treatments may be delayed based on the results of these tests. Do not miss any scheduled visits to your doctor.


What happens if I miss a dose?


Call your doctor for instructions if you miss an appointment for your vinblastine injection.


What happens if I overdose?


Seek emergency medical attention if you think you have received too much of this medicine.

Overdose symptoms may include severe forms of the serious side effects listed in this medication guide.


What should I avoid while receiving vinblastine?


Avoid being near people who have colds, the flu, or other contagious illnesses. Contact your doctor at once if you develop signs of infection.


Do not receive a "live" vaccine while you are being treated with vinblastine, and avoid coming into contact with anyone who has recently received a live vaccine. There is a chance that the virus could be passed on to you. Live vaccines include measles, mumps, rubella (MMR), oral polio, chickenpox (varicella), BCG (Bacillus Calmette and Guérin), and nasal flu vaccine.

Talk to your doctor about ways to avoid constipation while being treated with vinblastine.


Vinblastine side effects


Get emergency medical help if you have any of these signs of an allergic reaction: hives; difficult breathing; swelling of your face, lips, tongue, or throat. Call your doctor at once if you have a serious side effect such as:

  • signs of infection such as fever, chills, sore throat, mouth pain, white patches or sores inside your mouth or on your lips;




  • pale skin, feeling light-headed or short of breath, rapid heart rate, trouble concentrating;




  • easy bruising, unusual bleeding (nose, mouth, vagina, or rectum), purple or red pinpoint spots under your skin;




  • numbness, burning, pain, or tingly feeling;




  • bronchospasm (wheezing, chest tightness, trouble breathing);




  • severe constipation;




  • problems with vision, hearing, speech, balance, or daily activities;




  • sudden numbness or weakness on one side of the body, sudden headache or confusion;




  • chest pain or heavy feeling, pain spreading to the arm or shoulder, nausea, sweating, general ill feeling; or




  • pain, burning, redness, swelling, or skin changes where the IV needle was placed.



Less serious side effects may include:



  • temporary hair loss;




  • jaw pain;




  • tumor pain, bone pain;




  • missed menstrual periods;




  • nausea, vomiting, loss of appetite; or




  • feeling weak or tired.



This is not a complete list of side effects and others may occur. Call your doctor for medical advice about side effects. You may report side effects to FDA at 1-800-FDA-1088.


Vinblastine Dosing Information


Usual Adult Dose for Breast Cancer:

Initial Dose: 3.7 mg/m2 intravenously over approximately one minute, once.

Because of the variation in the depth of the leukopenic response following therapy, the manufacturer recommends that vinblastine not be given more frequently than once every 7 days. However, there are several multiple day regimens where the dose is split into several consecutive days.

The manufacturer outlines the following conservative incremental approach to dosage at weekly intervals for adults. Therapy may be continued at 5.5 mg/m2 for the second dose, 7.4 mg/m2 for the third dose, 9.25 mg/m2 for the fourth dose, and 11.1 mg/m2 for the fifth dose. This progression may be followed up to a maximum dosage of 18.5 mg/m2. Dosage regimens may vary in clinical practice according to the disease being treated and the combination of antineoplastic agents being used.

White blood cell counts should be obtained just prior to dosage administration. The nadir in the white blood cell count is generally observed from 5 to 10 days following the dosage. Recovery to pretreatment levels is usually observed from 7 to 14 days after treatment. If a dose reduces the white cell count to approximately 3,000 cells/mm3, the next dose should not be given until the white cell count has returned to at least 4,000/mm3. The previous dosage increment may then be administered at weekly intervals for maintenance. In some cases, oncolytic activity may be encountered before leukopenic effect. When this occurs, there is no need to increase subsequent doses.

The manufacturer states that the use of small amounts of vinblastine daily for long periods of time is not advisable and that strict adherence to the recommended dosage schedule is very important.

The duration of maintenance therapy varies according to the disease being treated and the combination of antineoplastic agents being used. Prolonged chemotherapy for maintaining remissions involves several risks, including life-threatening infectious diseases, sterility and the appearance of other cancers through suppression of immune surveillance. These risks must be balanced with potential benefits of therapy.

Usual Adult Dose for Kaposi's Sarcoma:

Initial Dose: 3.7 mg/m2 intravenously over approximately one minute, once.

Because of the variation in the depth of the leukopenic response following therapy, the manufacturer recommends that vinblastine not be given more frequently than once every 7 days. However, there are several multiple day regimens where the dose is split into several consecutive days.

The manufacturer outlines the following conservative incremental approach to dosage at weekly intervals for adults. Therapy may be continued at 5.5 mg/m2 for the second dose, 7.4 mg/m2 for the third dose, 9.25 mg/m2 for the fourth dose, and 11.1 mg/m2 for the fifth dose. This progression may be followed up to a maximum dosage of 18.5 mg/m2. Dosage regimens may vary in clinical practice according to the disease being treated and the combination of antineoplastic agents being used.

White blood cell counts should be obtained just prior to dosage administration. The nadir in the white blood cell count is generally observed from 5 to 10 days following the dosage. Recovery to pretreatment levels is usually observed from 7 to 14 days after treatment. If a dose reduces the white cell count to approximately 3,000 cells/mm3, the next dose should not be given until the white cell count has returned to at least 4,000/mm3. The previous dosage increment may then be administered at weekly intervals for maintenance. In some cases, oncolytic activity may be encountered before leukopenic effect. When this occurs, there is no need to increase subsequent doses.

The manufacturer states that the use of small amounts of vinblastine daily for long periods of time is not advisable and that strict adherence to the recommended dosage schedule is very important.

The duration of maintenance therapy varies according to the disease being treated and the combination of antineoplastic agents being used. Prolonged chemotherapy for maintaining remissions involves several risks, including life-threatening infectious diseases, sterility and the appearance of other cancers through suppression of immune surveillance. These risks must be balanced with potential benefits of therapy.

Usual Adult Dose for Testicular Cancer:

Initial Dose: 3.7 mg/m2 intravenously over approximately one minute, once.

Because of the variation in the depth of the leukopenic response following therapy, the manufacturer recommends that vinblastine not be given more frequently than once every 7 days. However, there are several multiple day regimens where the dose is split into several consecutive days.

The manufacturer outlines the following conservative incremental approach to dosage at weekly intervals for adults. Therapy may be continued at 5.5 mg/m2 for the second dose, 7.4 mg/m2 for the third dose, 9.25 mg/m2 for the fourth dose, and 11.1 mg/m2 for the fifth dose. This progression may be followed up to a maximum dosage of 18.5 mg/m2. Dosage regimens may vary in clinical practice according to the disease being treated and the combination of antineoplastic agents being used.

White blood cell counts should be obtained just prior to dosage administration. The nadir in the white blood cell count is generally observed from 5 to 10 days following the dosage. Recovery to pretreatment levels is usually observed from 7 to 14 days after treatment. If a dose reduces the white cell count to approximately 3,000 cells/mm3, the next dose should not be given until the white cell count has returned to at least 4,000/mm3. The previous dosage increment may then be administered at weekly intervals for maintenance. In some cases, oncolytic activity may be encountered before leukopenic effect. When this occurs, there is no need to increase subsequent doses.

The manufacturer states that the use of small amounts of vinblastine daily for long periods of time is not advisable and that strict adherence to the recommended dosage schedule is very important.

The duration of maintenance therapy varies according to the disease being treated and the combination of antineoplastic agents being used. Prolonged chemotherapy for maintaining remissions involves several risks, including life-threatening infectious diseases, sterility and the appearance of other cancers through suppression of immune surveillance. These risks must be balanced with potential benefits of therapy.

Usual Adult Dose for Hodgkin's Disease:

Initial Dose: 3.7 mg/m2 intravenously over approximately one minute, once.

Because of the variation in the depth of the leukopenic response following therapy, the manufacturer recommends that vinblastine not be given more frequently than once every 7 days. However, there are several multiple day regimens where the dose is split into several consecutive days.

The manufacturer outlines the following conservative incremental approach to dosage at weekly intervals for adults. Therapy may be continued at 5.5 mg/m2 for the second dose, 7.4 mg/m2 for the third dose, 9.25 mg/m2 for the fourth dose, and 11.1 mg/m2 for the fifth dose. This progression may be followed up to a maximum dosage of 18.5 mg/m2. Dosage regimens may vary in clinical practice according to the disease being treated and the combination of antineoplastic agents being used.

White blood cell counts should be obtained just prior to dosage administration. The nadir in the white blood cell count is generally observed from 5 to 10 days following the dosage. Recovery to pretreatment levels is usually observed from 7 to 14 days after treatment. If a dose reduces the white cell count to approximately 3,000 cells/mm3, the next dose should not be given until the white cell count has returned to at least 4,000/mm3. The previous dosage increment may then be administered at weekly intervals for maintenance. In some cases, oncolytic activity may be encountered before leukopenic effect. When this occurs, there is no need to increase subsequent doses.

The manufacturer states that the use of small amounts of vinblastine daily for long periods of time is not advisable and that strict adherence to the recommended dosage schedule is very important.

The duration of maintenance therapy varies according to the disease being treated and the combination of antineoplastic agents being used. Prolonged chemotherapy for maintaining remissions involves several risks, including life-threatening infectious diseases, sterility and the appearance of other cancers through suppression of immune surveillance. These risks must be balanced with potential benefits of therapy.

Usual Adult Dose for Mycosis Fungoides:

Initial Dose: 3.7 mg/m2 intravenously over approximately one minute, once.

Because of the variation in the depth of the leukopenic response following therapy, the manufacturer recommends that vinblastine not be given more frequently than once every 7 days. However, there are several multiple day regimens where the dose is split into several consecutive days.

The manufacturer outlines the following conservative incremental approach to dosage at weekly intervals for adults. Therapy may be continued at 5.5 mg/m2 for the second dose, 7.4 mg/m2 for the third dose, 9.25 mg/m2 for the fourth dose, and 11.1 mg/m2 for the fifth dose. This progression may be followed up to a maximum dosage of 18.5 mg/m2. Dosage regimens may vary in clinical practice according to the disease being treated and the combination of antineoplastic agents being used.

White blood cell counts should be obtained just prior to dosage administration. The nadir in the white blood cell count is generally observed from 5 to 10 days following the dosage. Recovery to pretreatment levels is usually observed from 7 to 14 days after treatment. If a dose reduces the white cell count to approximately 3,000 cells/mm3, the next dose should not be given until the white cell count has returned to at least 4,000/mm3. The previous dosage increment may then be administered at weekly intervals for maintenance. In some cases, oncolytic activity may be encountered before leukopenic effect. When this occurs, there is no need to increase subsequent doses.

The manufacturer states that the use of small amounts of vinblastine daily for long periods of time is not advisable and that strict adherence to the recommended dosage schedule is very important.

The duration of maintenance therapy varies according to the disease being treated and the combination of antineoplastic agents being used. Prolonged chemotherapy for maintaining remissions involves several risks, including life-threatening infectious diseases, sterility and the appearance of other cancers through suppression of immune surveillance. These risks must be balanced with potential benefits of therapy.

Usual Adult Dose for Choriocarcinoma:

Initial Dose: 3.7 mg/m2 intravenously over approximately one minute, once.

Because of the variation in the depth of the leukopenic response following therapy, the manufacturer recommends that vinblastine not be given more frequently than once every 7 days. However, there are several multiple day regimens where the dose is split into several consecutive days.

The manufacturer outlines the following conservative incremental approach to dosage at weekly intervals for adults. Therapy may be continued at 5.5 mg/m2 for the second dose, 7.4 mg/m2 for the third dose, 9.25 mg/m2 for the fourth dose, and 11.1 mg/m2 for the fifth dose. This progression may be followed up to a maximum dosage of 18.5 mg/m2. Dosage regimens may vary in clinical practice according to the disease being treated and the combination of antineoplastic agents being used.

White blood cell counts should be obtained just prior to dosage administration. The nadir in the white blood cell count is generally observed from 5 to 10 days following the dosage. Recovery to pretreatment levels is usually observed from 7 to 14 days after treatment. If a dose reduces the white cell count to approximately 3,000 cells/mm3, the next dose should not be given until the white cell count has returned to at least 4,000/mm3. The previous dosage increment may then be administered at weekly intervals for maintenance. In some cases, oncolytic activity may be encountered before leukopenic effect. When this occurs, there is no need to increase subsequent doses.

The manufacturer states that the use of small amounts of vinblastine daily for long periods of time is not advisable and that strict adherence to the recommended dosage schedule is very important.

The duration of maintenance therapy varies according to the disease being treated and the combination of antineoplastic agents being used. Prolonged chemotherapy for maintaining remissions involves several risks, including life-threatening infectious diseases, sterility and the appearance of other cancers through suppression of immune surveillance. These risks must be balanced with potential benefits of therapy.

Usual Adult Dose for Lymphoma:

Initial Dose: 3.7 mg/m2 intravenously over approximately one minute, once.

Because of the variation in the depth of the leukopenic response following therapy, the manufacturer recommends that vinblastine not be given more frequently than once every 7 days. However, there are several multiple day regimens where the dose is split into several consecutive days.

The manufacturer outlines the following conservative incremental approach to dosage at weekly intervals for adults. Therapy may be continued at 5.5 mg/m2 for the second dose, 7.4 mg/m2 for the third dose, 9.25 mg/m2 for the fourth dose, and 11.1 mg/m2 for the fifth dose. This progression may be followed up to a maximum dosage of 18.5 mg/m2. Dosage regimens may vary in clinical practice according to the disease being treated and the combination of antineoplastic agents being used.

White blood cell counts should be obtained just prior to dosage administration. The nadir in the white blood cell count is generally observed from 5 to 10 days following the dosage. Recovery to pretreatment levels is usually observed from 7 to 14 days after treatment. If a dose reduces the white cell count to approximately 3,000 cells/mm3, the next dose should not be given until the white cell count has returned to at least 4,000/mm3. The previous dosage increment may then be administered at weekly intervals for maintenance. In some cases, oncolytic activity may be encountered before leukopenic effect. When this occurs, there is no need to increase subsequent doses.

The manufacturer states that the use of small amounts of vinblastine daily for long periods of time is not advisable and that strict adherence to the recommended dosage schedule is very important.

The duration of maintenance therapy varies according to the disease being treated and the combination of antineoplastic agents being used. Prolonged chemotherapy for maintaining remissions involves several risks, including life-threatening infectious diseases, sterility and the appearance of other cancers through suppression of immune surveillance. These risks must be balanced with potential benefits of therapy.

Usual Adult Dose for Histiocytosis:

Initial Dose: 3.7 mg/m2 intravenously over approximately one minute, once.

Because of the variation in the depth of the leukopenic response following therapy, the manufacturer recommends that vinblastine not be given more frequently than once every 7 days. However, there are several multiple day regimens where the dose is split into several consecutive days.

The manufacturer outlines the following conservative incremental approach to dosage at weekly intervals for adults. Therapy may be continued at 5.5 mg/m2 for the second dose, 7.4 mg/m2 for the third dose, 9.25 mg/m2 for the fourth dose, and 11.1 mg/m2 for the fifth dose. This progression may be followed up to a maximum dosage of 18.5 mg/m2. Dosage regimens may vary in clinical practice according to the disease being treated and the combination of antineoplastic agents being used.

White blood cell counts should be obtained just prior to dosage administration. The nadir in the white blood cell count is generally observed from 5 to 10 days following the dosage. Recovery to pretreatment levels is usually observed from 7 to 14 days after treatment. If a dose reduces the white cell count to approximately 3,000 cells/mm3, the next dose should not be given until the white cell count has returned to at least 4,000/mm3. The previous dosage increment may then be administered at weekly intervals for maintenance. In some cases, oncolytic activity may be encountered before leukopenic effect. When this occurs, there is no need to increase subsequent doses.

The manufacturer states that the use of small amounts of vinblastine daily for long periods of time is not advisable and that strict adherence to the recommended dosage schedule is very important.

The duration of maintenance therapy varies according to the disease being treated and the combination of antineoplastic agents being used. Prolonged chemotherapy for maintaining remissions involves several risks, including life-threatening infectious diseases, sterility and the appearance of other cancers through suppression of immune surveillance. These risks must be balanced with potential benefits of therapy.

Usual Pediatric Dose for Malignant Disease:

Hodgkin's disease: 2.5 to 6 mg/m2/day once every one to two weeks for three to six weeks. The maximum weekly dose is 12.5 mg/m2.

Histiocytosis: 0.4 mg/kg once every seven to ten days.

Germ cell tumor: 0.2 mg/kg on days one and two of the cycle every three weeks for four cycles.


What other drugs will affect vinblastine?


Tell your doctor about all other medications you use, especially:



  • conivaptan (Vaprisol);




  • diclofenac (Arthrotec, Cataflam, Voltaren, Flector Patch, Solareze);




  • imatinib (Gleevec);




  • isoniazid (for treating tuberculosis);




  • phenytoin (Dilantin);




  • an antibiotic such as clarithromycin (Biaxin), dalfopristin/quinupristin (Synercid), erythromycin (E.E.S., EryPed, Ery-Tab, Erythrocin), or telithromycin (Ketek);




  • antifungal medication such as clotrimazole (Mycelex Troche), itraconazole (Sporanox), ketoconazole (Nizoral), or voriconazole (Vfend);




  • an antidepressant such as nefazodone;




  • heart or blood pressure medication such as diltiazem (Cartia, Cardizem), felodipine (Plendil), nifedipine (Nifedical, Procardia), verapamil (Calan, Covera, Isoptin, Verelan), and others;




  • cancer medicines such as cisplatin (Platinol), carboplatin (Paraplatin), mitomycin (Mutamycin), or oxaliplatin (Elixatin);




  • HIV/AIDS medicine such as atazanavir (Reyataz), delavirdine (Rescriptor), fosamprenavir (Lexiva), indinavir (Crixivan), nelfinavir (Viracept), saquinavir (Invirase), or ritonavir (Norvir).



This list is not complete and there may be other drugs that can interact with vinblastine. Tell your doctor about all your prescription and over-the-counter medications, vitamins, minerals, herbal products, and drugs prescribed by other doctors. Do not start a new medication without telling your doctor.



More vinblastine resources


  • Vinblastine Side Effects (in more detail)
  • Vinblastine Dosage
  • Vinblastine Use in Pregnancy & Breastfeeding
  • Vinblastine Drug Interactions
  • Vinblastine Support Group
  • 0 Reviews for Vinblastine - Add your own review/rating


  • vinblastine Intravenous Advanced Consumer (Micromedex) - Includes Dosage Information

  • Velban Monograph (AHFS DI)

  • Vinblastine Prescribing Information (FDA)

  • Vinblastine MedFacts Consumer Leaflet (Wolters Kluwer)



Compare vinblastine with other medications


  • Breast Cancer
  • Cancer
  • Choriocarcinoma
  • Histiocytosis
  • Hodgkin's Lymphoma
  • Kaposi's Sarcoma
  • Lymphoma
  • Mycosis Fungoides
  • Testicular Cancer


Where can I get more information?


  • Your doctor or pharmacist can provide more information about vinblastine.

See also: vinblastine side effects (in more detail)